Mazda 323

since 1985 release

Repair and operation of the car



Mazda 323

- Introduction
   About this Management
   Mazda-323 brand cars — the introduction
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, tools and equipment of a workplace
   Start of the engine from an auxiliary source
   Poddomkrachivaniye and towage
   Automobile chemicals, oils and lubricants
   Diagnostics of malfunctions
   Routine maintenance
   - Works on maintenance
      Oil replacement
      Replacement of an oil filter
      Replacement of a perepuskny oil filter
      Visual check on oil leak
      Check of level of engine oil
      Check of level of cooling liquid
      Replacement of cooling liquid
      Visual check of tightness of the cooling system
      Frost resistance check
      Adjustment of gaps of valves
      Pulling up of bolts of a head of cylinders
      Pulling up of bolts of inlet and final collectors
      Check of the sensor of provision of a butterfly valve
      Check of the moment of ignition
      Replacement of candles ignition/check of electric contacts
      Replacement of an element of the air filter
      Discharge of a sediment of the fuel filter of the diesel engine / replacement of the fuel filter
      Check of a maple belt / tension / replacement of a gear belt
      Visual check of system of production of the fulfilled gases
   + Box transfers/drive of wheels
   + Brakes/tires/wheels
   + Steering management / drive of forward wheels
   + Car electric equipment
   + Body / internal equipment
+ Petrol engines
+ Engine lubrication system
+ Engine cooling system
+ System of ignition
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and system of steering
+ Brake system
+ Wheels and tires, body, coloring of the car, care of the car
+ System of electric equipment
+ Heater, system of lighting, devices
+ Governing bodies and methods of operation
+ Electric circuits






Replacement of an oil filter

 PERFORMANCE ORDER

  1. To unscrew an oil filter. The oil filter is, looking in the direction of the movement, behind on the block of cylinders. For unscrewing of the filter there is a special tool, for example, of HAZET 2172. It is also possible to hammer sideways into the filter the sharp screw-driver. Oil will follow at the same time — to substitute capacity.
  1. To clear a flange of an oil filter on the block of cylinders fuel. To remove laying of the filter.
  2. To slightly cover rubber laying on the filter with engine oil.

 PERFORMANCE ORDER

  1. Petrol engine: To screw the new filter a hand. When laying of the filter adjoins to the block of cylinders, to tighten the filter on 1/2 turns. To follow instructions on the filter.

The filters only intended for this model can be used.


 PERFORMANCE ORDER

  1. Diesel engine: To screw the filter a hand until laying adjoins to an oil cooler. Then to tighten the filter a coupling tape on 7/8 turns. To follow instructions on the filter.

The filters only intended for this model can be used.