Mazda 323

since 1985 release

Repair and operation of the car



Mazda 323

- Introduction
   About this Management
   Mazda-323 brand cars — the introduction
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, tools and equipment of a workplace
   Start of the engine from an auxiliary source
   Poddomkrachivaniye and towage
   Automobile chemicals, oils and lubricants
   Diagnostics of malfunctions
   Routine maintenance
   + Works on maintenance
   - Box transfers/drive of wheels
      Visual check of tightness
      Mechanical transmission: Check of level of oil
      Mechanical transmission: Oil replacement
      Automatic transmission: Check of level of oil
      Box of differential and transfer case: Check of level of oil
      Box of differential and transfer case: Oil replacement
      Check of rubber cuffs of power shafts
      Check of level of liquid of the drive of coupling
      Check/adjustment of a pedal of coupling
   + Brakes/tires/wheels
   + Steering management / drive of forward wheels
   + Car electric equipment
   + Body / internal equipment
+ Petrol engines
+ Engine lubrication system
+ Engine cooling system
+ System of ignition
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and system of steering
+ Brake system
+ Wheels and tires, body, coloring of the car, care of the car
+ System of electric equipment
+ Heater, system of lighting, devices
+ Governing bodies and methods of operation
+ Electric circuits






Mechanical transmission: Check of level of oil

The following details will be necessary:

  • All-wheel drive cars: laying of a test stopper.
  • Gearbox oil according to the specification:
    • Cars to 9/89 g of the issue: temperature is above -18 °C: API GL - 4 or GL - 5 SAE 90 or 80 W - 90, temperature is below -18 °C: ATF Dexron - II.
    • Cars from 10/89 g of the issue: API GL - 4 or GL - 5 75 W - 90 or ATF Dexron - II (BP DOHC: only ATF Dexron - II).

Check

Front-wheel cars

 PERFORMANCE ORDER

  1. To unscrew a bolt of fastening of a gear wheel of a shaft of a speedometer on the transmission.
  2. To take out a gear wheel together with a speedometer shaft from a transmission case.
  3. To wipe a gear wheel a pure rag and again to insert it.
  1. To take out a gear wheel of a shaft of a speedometer and to consider indications of level of oil. It has to be between tags of F and L.
  1. To insert a gear wheel of a shaft of a speedometer and to tighten a fastening bolt.

All-wheel drive cars

 PERFORMANCE ORDER

  1. To lift the car in horizontal position.
  2. If is available, to remove a guard of the engine and transmission.
  3. To visually check the transmission for tightness.
  1. To turn out a test stopper (depending on the direction of the movement) from the forward party of a case of the transmission.
  1. Level of oil has to be at height of a jellied opening. If necessary to add gearbox oil.
  2. To establish a test stopper with new laying and to tighten 55 Nanometers with effort.
  3. If is available, to establish a guard of the engine and transmission.
  4. To lower the car.