Mazda 323

since 1985 release

Repair and operation of the car



Mazda 323

- Introduction
   About this Management
   Mazda-323 brand cars — the introduction
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, tools and equipment of a workplace
   Start of the engine from an auxiliary source
   Poddomkrachivaniye and towage
   Automobile chemicals, oils and lubricants
   Diagnostics of malfunctions
   Routine maintenance
   + Works on maintenance
   - Box transfers/drive of wheels
      Visual check of tightness
      Mechanical transmission: Check of level of oil
      Mechanical transmission: Oil replacement
      Automatic transmission: Check of level of oil
      Box of differential and transfer case: Check of level of oil
      Box of differential and transfer case: Oil replacement
      Check of rubber cuffs of power shafts
      Check of level of liquid of the drive of coupling
      Check/adjustment of a pedal of coupling
   + Brakes/tires/wheels
   + Steering management / drive of forward wheels
   + Car electric equipment
   + Body / internal equipment
+ Petrol engines
+ Engine lubrication system
+ Engine cooling system
+ System of ignition
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and system of steering
+ Brake system
+ Wheels and tires, body, coloring of the car, care of the car
+ System of electric equipment
+ Heater, system of lighting, devices
+ Governing bodies and methods of operation
+ Electric circuits






Mechanical transmission: Oil replacement

The following spare details are necessary:

  • Laying of a drain stopper.
  • Gearbox oil according to the specification:
    • Cars to 9/89 g of the issue: temperature is above -18 °C: API GL - 4 or GL - 5 SAE 90 or 80 W - 90, temperature is below -18 °C: ATF Dexron - II.
    • Cars from 10/89 g of the issue: API GL - 4 or GL - 5 75 W - 90 or ATF Dexron - II (BP DOHC: only ATF Dexron - II).

Replacement

 PERFORMANCE ORDER

  1. To lift the car in horizontal position.
  2. If is available, to remove a guard of the engine and transmission.
  3. To visually check tightness of the transmission.
  4. To turn out a masloslivny stopper and to allow to flow down to oil.
  5. To screw in a masloslivny stopper with new laying with effort of 55 Nanometers.
  1. To turn out a maslozalivny stopper on the forward party of the transmission.
  1. To fill the transmission with gearbox oil to the meeting specification to bottom edge of a jellied opening.

Total of oil

Engine Quantity, l
E1, EZ, E5 3, 2
VZ, B5, B6 to 9/89 g of the issue. 3, 2
turbo engine 9/89 of of the issue. 3, 35
the four-wheel drive to 9/89 g of the issue. 3, 55
VZ, V6, BP of SOHC from 10/89 g of the issue. 2, 68
BP OF DOHC 3, 35

 PERFORMANCE ORDER

  1. To establish a maslozalivny stopper and to tighten 55 Nanometers with effort.
  2. If is available, to establish a guard of the engine and transmission.
  3. To lower the car.