Mazda 323

since 1985 release

Repair and operation of the car



Mazda 323

- Introduction
   About this Management
   Mazda-323 brand cars — the introduction
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, tools and equipment of a workplace
   Start of the engine from an auxiliary source
   Poddomkrachivaniye and towage
   Automobile chemicals, oils and lubricants
   Diagnostics of malfunctions
   Routine maintenance
   + Works on maintenance
   - Box transfers/drive of wheels
      Visual check of tightness
      Mechanical transmission: Check of level of oil
      Mechanical transmission: Oil replacement
      Automatic transmission: Check of level of oil
      Box of differential and transfer case: Check of level of oil
      Box of differential and transfer case: Oil replacement
      Check of rubber cuffs of power shafts
      Check of level of liquid of the drive of coupling
      Check/adjustment of a pedal of coupling
   + Brakes/tires/wheels
   + Steering management / drive of forward wheels
   + Car electric equipment
   + Body / internal equipment
+ Petrol engines
+ Engine lubrication system
+ Engine cooling system
+ System of ignition
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and system of steering
+ Brake system
+ Wheels and tires, body, coloring of the car, care of the car
+ System of electric equipment
+ Heater, system of lighting, devices
+ Governing bodies and methods of operation
+ Electric circuits






Box of differential and transfer case: Oil replacement

On cars with the four-wheel drive it is necessary to replace oil in a box of differential and in the transfer case. The following spare details are necessary:

  • Laying of maslozalivny and masloslivny traffic jams.
  • Gearbox oil according to the specification: temperatures are above -18 °C: API GL - 5 SAE 90; temperatures are below -18 °C: API GL - 5 SAE 80.

Replacement

Transfer case

 PERFORMANCE ORDER

  1. To lift the car in horizontal position.
  2. If is available, to remove a guard of the engine and transmission.
  3. To make visual check of tightness of the transfer case.
  1. To turn out a maslozalivny stopper - In-.
  1. To turn out a masloslivny stopper - And - and to merge oil until it does not begin to drip. To establish a masloslivny stopper with new laying and to tighten 55 Nanometers with effort.
  2. To fill in about 0, 5 l of gearbox oil and to check level a finger. Level has to be at bottom edge of a jellied opening.
  3. To establish an oil-filling stopper with new laying and to tighten 55 Nanometers with effort.
  4. If is available, to establish a guard of the engine and transmission.
  5. To lower the car.

Back differential

 PERFORMANCE ORDER

  1. To lift the car in horizontal position.
  2. To visually check tightness of the back bridge.
  1. To turn out a maslozalivny stopper - In-.
  1. To turn out a masloslivny stopper - And - and to merge oil until it does not begin to drip. To establish a masloslivny stopper with new laying and to tighten 55 Nanometers with effort.
  2. To fill in about 0,65 l of gearbox oil and to check level a finger. Level has to be at bottom edge of a jellied opening.
  3. To establish an oil-filling stopper with new laying and to tighten 55 Nanometers with effort.
  4. To lower the car.