Mazda 323

since 1985 release

Repair and operation of the car



Mazda 323

- Introduction
   About this Management
   Mazda-323 brand cars — the introduction
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, tools and equipment of a workplace
   Start of the engine from an auxiliary source
   Poddomkrachivaniye and towage
   Automobile chemicals, oils and lubricants
   Diagnostics of malfunctions
   Routine maintenance
   - Works on maintenance
      Oil replacement
      Replacement of an oil filter
      Replacement of a perepuskny oil filter
      Visual check on oil leak
      Check of level of engine oil
      Check of level of cooling liquid
      Replacement of cooling liquid
      Visual check of tightness of the cooling system
      Frost resistance check
      Adjustment of gaps of valves
      Pulling up of bolts of a head of cylinders
      Pulling up of bolts of inlet and final collectors
      Check of the sensor of provision of a butterfly valve
      Check of the moment of ignition
      Replacement of candles ignition/check of electric contacts
      Replacement of an element of the air filter
      Discharge of a sediment of the fuel filter of the diesel engine / replacement of the fuel filter
      Check of a maple belt / tension / replacement of a gear belt
      Visual check of system of production of the fulfilled gases
   + Box transfers/drive of wheels
   + Brakes/tires/wheels
   + Steering management / drive of forward wheels
   + Car electric equipment
   + Body / internal equipment
+ Petrol engines
+ Engine lubrication system
+ Engine cooling system
+ System of ignition
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and system of steering
+ Brake system
+ Wheels and tires, body, coloring of the car, care of the car
+ System of electric equipment
+ Heater, system of lighting, devices
+ Governing bodies and methods of operation
+ Electric circuits






Visual check on oil leak

 PERFORMANCE ORDER

  1. At the engine covered by oil and a high expense of oil it is necessary to check where oil acts. For this purpose to check the following places:
    • To open a cover of a jellied mouth and to check laying for existence of damages and cracks.
    • To check durability of landing of a ventilating hose from a cover of a jellied opening to the air filter.
    • Laying of a cover of a head of cylinders.
    • Laying of a head of cylinders.
    • Ignition distributor flange junction.
    • Laying of an oil filter: The filter on a flange.
    • Stopper of a masloslivny opening (laying).
    • Laying of the pallet of a case.
    • Junction of the engine and transmission (laying on a flywheel or a shaft of the transmission).
  2. As at leakage oil spreads on the big area, at once to find the place of leak quite difficult. By search arrive as follows:
    • To make a wash of the engine. To cover the engine with a cold cleaner and after a while to rinse with water. Previously to cover the distributor of ignition and the generator with plastic packages.
    • To powder junctions and consolidations on the engine outside with talc or lime.
    • To check oil level, if necessary to add.
    • To make a trial trip. As oil when heating is diluted and therefore appears in places of leak quicker, a trial trip it is necessary to make on distance 30 km on the speedway.
    • Then, lighting the engine with a lamp, to define the place of leak and to eliminate malfunction.