Mazda 323

since 1985 release

Repair and operation of the car



Mazda 323

- Introduction
   About this Management
   Mazda-323 brand cars — the introduction
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, tools and equipment of a workplace
   Start of the engine from an auxiliary source
   Poddomkrachivaniye and towage
   Automobile chemicals, oils and lubricants
   Diagnostics of malfunctions
   Routine maintenance
   - Works on maintenance
      Oil replacement
      Replacement of an oil filter
      Replacement of a perepuskny oil filter
      Visual check on oil leak
      Check of level of engine oil
      Check of level of cooling liquid
      Replacement of cooling liquid
      Visual check of tightness of the cooling system
      Frost resistance check
      Adjustment of gaps of valves
      Pulling up of bolts of a head of cylinders
      Pulling up of bolts of inlet and final collectors
      Check of the sensor of provision of a butterfly valve
      Check of the moment of ignition
      Replacement of candles ignition/check of electric contacts
      Replacement of an element of the air filter
      Discharge of a sediment of the fuel filter of the diesel engine / replacement of the fuel filter
      Check of a maple belt / tension / replacement of a gear belt
      Visual check of system of production of the fulfilled gases
   + Box transfers/drive of wheels
   + Brakes/tires/wheels
   + Steering management / drive of forward wheels
   + Car electric equipment
   + Body / internal equipment
+ Petrol engines
+ Engine lubrication system
+ Engine cooling system
+ System of ignition
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and system of steering
+ Brake system
+ Wheels and tires, body, coloring of the car, care of the car
+ System of electric equipment
+ Heater, system of lighting, devices
+ Governing bodies and methods of operation
+ Electric circuits






Visual check of tightness of the cooling system

 PERFORMANCE ORDER

  1. To check hoses of cooling liquid for existence of cracks, to replace the hardened hoses.
  2. Hoses have to be put on unions rather deeply.
  3. To check durability of landing of hose collars. If necessary to establish screw collars instead of former tightening collars.
  4. If the level of cooling liquid often falls, and places of leak do not manage to be defined, to make check on the warm engine. For this purpose to warm up the engine and to leave to idle until the fan turns on. To watch at the same time whether cooling liquid in the field of the water pump acts.
  5. Obvious loss of cooling liquid and/or availability of oil in cooling liquid, and also white exhaust cloud at the warm engine indicate defect of laying of a head of cylinders.

If to find the place of leak it does not work well, recommended to make check under pressure, see the Section Check of Tightness of the Cooling System. At the same time it is possible to check also perepuskny the cover valve.