Repair and operation of the car Mazda 323 - Removal and installation/adjustment of a door//m323.ru

Mazda 323

since 1985 release

Repair and operation of the car



Mazda 323

+ Introduction
+ Petrol engines
+ Engine lubrication system
+ Engine cooling system
+ System of ignition
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and system of steering
+ Brake system
- Wheels and tires, body, coloring of the car, care of the car
   The sizes of disks and tires/pressure in tires
   Designations of disks
   Designations of tires
   Replacement of wheels
   Rules of care of tires
   Balancing of wheels
   Antisliding chains
   Spare wheel
   Wear of tires
   Body
   Removal and installation of a front bumper
   Removal and installation of a rear bumper
   Removal and installation of a front grille
   Removal and installation of side moldings
   Removal and installation of a forward wing
   Removal and installation/adjustment of a cowl
   Removal and installation/adjustment of a door of a back
   Removal and installation/adjustment of a door
   Upholstery door door/window regulator/glass
   Removal and installation of an upholstery of a door
   Removal and installation of a glass/window regulator of a forward door
   Door lock lock/handle/cylinder
   Back door lock / internal drive
   External mirror
   Removal and installation of glass of a mirror
   Panel of devices / average console
   Front seats
   Removal and installation of a back seat
   Back seat
   Coloring of the car
   Elimination of damages from stones
   Rikhtovka body/repair of rusty openings
   Preparation for painting
   Coloring
   Wash of the car
   Care of a varnish covering
   Protection of the bottom and preservation of cavities
   Care of an upholstery
+ System of electric equipment
+ Heater, system of lighting, devices
+ Governing bodies and methods of operation
+ Electric circuits






Removal and installation/adjustment of a door

To remove details in the sequence. Previously to disconnect a weight cable from the battery.

MAZDA 323 from 10/89 g вып

Removal

 PERFORMANCE ORDER

  1. To remove a door upholstery.
  2. To switch-off the multicontact plug, for example, for the window regulator motor, electrically an adjustable mirror, the central locking device.
  3. To beat out a pin-2-on a door clamp up by means of the hammer and a drift.
  4. To unscrew bolts on door hinges. Previously to mark adjusting situation, for this purpose to lead round heads of bolts a felt-tip pen. To remove a door by means of the assistant.

Installation

 PERFORMANCE ORDER

  1. To insert, level and screw a door.

If the door needs to be leveled on new, it is necessary to remove the lock previously.

  1. To insert from above a door brake pin.
  2. To connect electric plugs and to establish a door upholstery.
  3. If it is required, to adjust a door.
  4. To put the door lock.

Adjustment of a door

 PERFORMANCE ORDER

  1. The door needs to be adjusted if it is incorrectly closed also after its removal.
  2. To weaken a door wedge on so many that it could be shifted blows of the rubber hammer. The cross screw-driver or the screw-driver is for this purpose necessary for internal TORX - bolts.