Mazda 323

since 1985 release

Repair and operation of the car



Mazda 323

+ Introduction
+ Petrol engines
+ Engine lubrication system
+ Engine cooling system
+ System of ignition
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and system of steering
+ Brake system
- Wheels and tires, body, coloring of the car, care of the car
   The sizes of disks and tires/pressure in tires
   Designations of disks
   Designations of tires
   Replacement of wheels
   Rules of care of tires
   Balancing of wheels
   Antisliding chains
   Spare wheel
   Wear of tires
   Body
   Removal and installation of a front bumper
   Removal and installation of a rear bumper
   Removal and installation of a front grille
   Removal and installation of side moldings
   Removal and installation of a forward wing
   Removal and installation/adjustment of a cowl
   Removal and installation/adjustment of a door of a back
   Removal and installation/adjustment of a door
   Upholstery door door/window regulator/glass
   Removal and installation of an upholstery of a door
   Removal and installation of a glass/window regulator of a forward door
   Door lock lock/handle/cylinder
   Back door lock / internal drive
   External mirror
   Removal and installation of glass of a mirror
   Panel of devices / average console
   Front seats
   Removal and installation of a back seat
   Back seat
   Coloring of the car
   Elimination of damages from stones
   Rikhtovka body/repair of rusty openings
   Preparation for painting
   Coloring
   Wash of the car
   Care of a varnish covering
   Protection of the bottom and preservation of cavities
   Care of an upholstery
+ System of electric equipment
+ Heater, system of lighting, devices
+ Governing bodies and methods of operation
+ Electric circuits






Upholstery door door/window regulator/glass

MAZDA 323 from 10/89 g of the issue.

1 — the window regulator handle
2 — a slip
3 — a door upholstery (a manual window regulator)
4 — an upholstery of a door (power window)
5 — the internal handle of a door

6 — consolidation
7 — a sealing film
8 — door glass
9 — the directing level
10 — a manual window regulator
11 — the power window


 PERFORMANCE ORDER

  1. Adjustment is carried out by weakening of bolts of hinges and movement of a door. Hinges have openings of the bigger size, than diameter of bolts of fastening, i.e. the hinge can be shifted.
  1. For adjustment of gaps to weaken bolts of hinges on a body (the first or second rack of a body), without unscrewing them. On cars with 9/85 on 9/89 g of the issue to adjust a door so that it settled down in parallel and at identical distance from surrounding elements of a body.
  1. To level a door on a body contour: If the door in the closed state costs not level with a body, to weaken bolts of hinges on a door and to respectively displace a door. The back door in front can settle down further a forward door at most on 1 mm.
  1. In back area of a door it is necessary to execute adjustment of a wedge of a door. For this purpose to weaken a locking wedge that it could be shifted easy blows of the polymeric hammer. To close and level a door. Then carefully to open a door and to tighten two bolts of a wedge with effort of 25 Nanometers. For a possibility of control of shift to lead round a wedge a felt-tip pen.
  2. If the door is faultlessly located in the closed state, to tighten bolts of hinges with effort of 25 Nanometers.