Repair and operation of the car Mazda 323 - Removal and installation of a glass/window regulator of a forward door//m323.ru

Mazda 323

since 1985 release

Repair and operation of the car



Mazda 323

+ Introduction
+ Petrol engines
+ Engine lubrication system
+ Engine cooling system
+ System of ignition
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and system of steering
+ Brake system
- Wheels and tires, body, coloring of the car, care of the car
   The sizes of disks and tires/pressure in tires
   Designations of disks
   Designations of tires
   Replacement of wheels
   Rules of care of tires
   Balancing of wheels
   Antisliding chains
   Spare wheel
   Wear of tires
   Body
   Removal and installation of a front bumper
   Removal and installation of a rear bumper
   Removal and installation of a front grille
   Removal and installation of side moldings
   Removal and installation of a forward wing
   Removal and installation/adjustment of a cowl
   Removal and installation/adjustment of a door of a back
   Removal and installation/adjustment of a door
   Upholstery door door/window regulator/glass
   Removal and installation of an upholstery of a door
   Removal and installation of a glass/window regulator of a forward door
   Door lock lock/handle/cylinder
   Back door lock / internal drive
   External mirror
   Removal and installation of glass of a mirror
   Panel of devices / average console
   Front seats
   Removal and installation of a back seat
   Back seat
   Coloring of the car
   Elimination of damages from stones
   Rikhtovka body/repair of rusty openings
   Preparation for painting
   Coloring
   Wash of the car
   Care of a varnish covering
   Protection of the bottom and preservation of cavities
   Care of an upholstery
+ System of electric equipment
+ Heater, system of lighting, devices
+ Governing bodies and methods of operation
+ Electric circuits






Removal and installation of a glass/window regulator of a forward door

Removal

 PERFORMANCE ORDER

  1. To remove an internal upholstery of a door.
  1. To lower glass until bolts of fastening of glass appear in a frame cut.
  1. To unscrew the lowered glass from a window regulator, for this purpose to release 2 bolts.
  1. To incline glass forward and to take out from the mine of a door.
  1. To weaken window regulator bolts on a door plate. At the power window besides to disconnect electric wires. To take out a window regulator from the lower cut of a frame.

Installation

 PERFORMANCE ORDER

  1. To insert a window regulator into a door and to screw it. If it is required, to connect the plug and to install the power window in the represented situation.
  1. To insert glass into a door and to screw on the elevator 2 bolts. Usually, glass of a door is not required to be regulated.
  2. At the power window to connect the plug if it is not connected yet.
  3. To establish a door upholstery.