Mazda 323

since 1985 release

Repair and operation of the car



Mazda 323

+ Introduction
+ Petrol engines
+ Engine lubrication system
+ Engine cooling system
+ System of ignition
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and system of steering
+ Brake system
+ Wheels and tires, body, coloring of the car, care of the car
- System of electric equipment
   Search of malfunctions of electric system
   Check of the switch on a current transmission
   Check of the relay
   Check of the motor of a screen wiper
   Verification of indexes of turn
   Check of stoplights
   Check of a heater of back glass
   Separation and connection of cable plugs
   Arrangement of safety locks
   Replacement of safety locks
   Removal and installation of the battery
   Check of the battery
   The battery is discharged in itself
   Battery charging
   Storage of the battery
   Generator
   Security measures for the generator of alternating current
   Check of tension of the generator
   Removal and installation of the generator
   Generator components
   Dismantling generator/replacement of coal brushes
   Removal and installation of a starter
   Check/replacement of the traction relay of a starter
+ Heater, system of lighting, devices
+ Governing bodies and methods of operation
+ Electric circuits








canadian drug companies



Check of the motor of a screen wiper

The motor of a screen wiper is in a waterproof casing under a windshield, the motor of a back screen wiper is in a back door. For check the corresponding facing has to be removed. The motor of a forward screen wiper will be considered further, with a back screen wiper to arrive as appropriate.

Check of a forward screen wiper

 PERFORMANCE ORDER

  1. At first to find out whether the motor of a cleaner or giving of tension is faulty. To work for this purpose as follows.
  2. To disconnect the multicontact plug on the screen wiper motor.
From 10/89 g of the issue.
  1. Tax by means of an auxiliary cable tension from a plus pole of the battery on the page plug. (The minus pole of the motor is connected to battery minus through a body).
  2. The motor of a screen wiper has to work at the 1st step (slowly) now. If it does not work, so the motor or the 1st step is faulty.
  3. To connect a plus cable to the plug and to the left of the page plug. The motor has to work quickly at the 2nd step now.

Check of a back screen wiper

 PERFORMANCE ORDER

  1. To connect a plus cable of the battery to the plug A, and weight to the plug B of the plug and to check whether the motor works.
  1. Then to disconnect weight from the plug B and at once to connect to the motor case. The motor has to finish to the provision of a stop and stop.
 9/85-9/89 of the issue.
  1. To give an auxiliary cable tension from a plus pole of the battery on the plug b. To connect weight from a minus pole of the battery to the plug and. The plug b is at the left below, the plug and on the right below.
  2. The motor of a screen wiper has to work at the 1st step (slowly). If it does not work, so the motor or the 1st step is faulty.
  1. To connect a minus cable to the page plug. The plug with is over the plug and. The motor has to work at the 2nd step (quickly) now.

Check of a back screen wiper

 PERFORMANCE ORDER

  1. To connect a plus cable of the battery to the plug and, a weight cable to the plug b of the plug and to check whether the engine works.
  2. Then to remove weight from the plug b and at once to connect to the motor case. The motor has to finish to the provision of a stop and stop.
  3. If the motor of a screen wiper works incorrectly, to establish new, see the Head Otopitel, system of lighting, devices, the Section Removal and installation of the motor of a back screen wiper.
  4. To connect the plug of the motor of a forward screen wiper.