canada rx connection

Mazda 323

since 1985 release

Repair and operation of the car



Mazda 323

+ Introduction
+ Petrol engines
+ Engine lubrication system
+ Engine cooling system
+ System of ignition
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and system of steering
+ Brake system
+ Wheels and tires, body, coloring of the car, care of the car
+ System of electric equipment
- Heater, system of lighting, devices
   Heater
   Fan motor
   Removal and installation of the fan of a heater
   Control unit of a heater
   Adjustment of drives of a heater
   Check of the motor of fans/preresistors
   Check of the switch of a heater
   System of lighting
   Table of lamps
   Replacement of lamps of external lighting
   Headlight
   Removal and installation of a headlight
   Adjustment of headlights
   Removal and installation of back lamps
   Devices
   Instrument guard
   Removal and installation of an instrument guard
   Devices
   Removal and installation of the radio receiver
   Removal and installation of loudspeakers
   Removal and installation of the shtyrevy antenna
   Replacement of brushes of screen wipers
   Removal and installation/adjustment snuffled windscreen washer
   Removal and installation of levers of a forward screen wiper
   Forward screen wiper
   Removal and installation of the motor of a forward screen wiper
   Back screen wiper
   Removal and installation of the motor of a back screen wiper
   Removal and installation of the lever of a back screen wiper
+ Governing bodies and methods of operation
+ Electric circuits






Removal and installation of the radio receiver

On sale there are radio receivers with code number. After each connection of the receiver a certain code has to be set, otherwise the receiver will not work, the code serves for protection against theft. If the receiver is coded, before shutdown of the battery or removal of the receiver it is necessary to define a protective code. If the code is unknown, only the producer can turn on the receiver. The individual code in most cases is in the passport of the radio receiver. The passport should not be stored in the car.


 PERFORMANCE ORDER

  1. To disconnect a weight cable from the battery.

At the same time data from memory of malfunctions of the engine or a protective code of the radio receiver are erased. Before shutdown of the battery it is necessary to read instructions in the Section Removal also installation of the battery.

  1. Depending on equipment: To remove the average console, see the Head Kolesa and tires, a body, coloring of the car, care of the car, the Section Panel of Devices / Average the console.
  2. To remove a slip-1-.
  1. To unscrew the radio receiver and fastening. To evenly take out the radio receiver, without warping it.
  1. To unscrew a weight cable from a reverse side of the radio receiver.
  2. To disconnect plugs of the antenna and loudspeakers, to disconnect the multicontact plug of food. If the receiver is connected not by serial wires, before shutdown of a wire it is necessary to mark not to mix them at installation.

Installation

 PERFORMANCE ORDER

  1. To connect plugs from a reverse side of the radio receiver.
  2. To insert the receiver into the dashboard and to screw it.
  3. To establish an overlay of the receiver and/or the average console, see the Head Kolesa and tires, a body, coloring of the car, care of the car, the Section Panel of Devices / Average the console.
  4. To connect a weight cable to the battery.
  5. To turn on the receiver and to check its work. If the receiver is coded, previously to enter a protective code.
  6. To determine time on hours.

The instruction for additional installation of the radio receiver

If the custom-made cable of food is used, to watch that there were no free uninsulated ends. Otherwise there can be a short circuit leading to burn-out of cables.

  • It must be kept in mind that only the standard noise suppressing set can be used. On sale there are noise suppressing sets especially for MAZDA.