Mazda 323

since 1985 release

Repair and operation of the car



Mazda 323

+ Introduction
+ Petrol engines
+ Engine lubrication system
+ Engine cooling system
+ System of ignition
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and system of steering
+ Brake system
+ Wheels and tires, body, coloring of the car, care of the car
+ System of electric equipment
- Heater, system of lighting, devices
   Heater
   Fan motor
   Removal and installation of the fan of a heater
   Control unit of a heater
   Adjustment of drives of a heater
   Check of the motor of fans/preresistors
   Check of the switch of a heater
   System of lighting
   Table of lamps
   Replacement of lamps of external lighting
   Headlight
   Removal and installation of a headlight
   Adjustment of headlights
   Removal and installation of back lamps
   Devices
   Instrument guard
   Removal and installation of an instrument guard
   Devices
   Removal and installation of the radio receiver
   Removal and installation of loudspeakers
   Removal and installation of the shtyrevy antenna
   Replacement of brushes of screen wipers
   Removal and installation/adjustment snuffled windscreen washer
   Removal and installation of levers of a forward screen wiper
   Forward screen wiper
   Removal and installation of the motor of a forward screen wiper
   Back screen wiper
   Removal and installation of the motor of a back screen wiper
   Removal and installation of the lever of a back screen wiper
+ Governing bodies and methods of operation
+ Electric circuits











Adjustment of drives of a heater

From 10/89 g of the issue.

Cable of the gate of the fresh / circulating air

 PERFORMANCE ORDER

  1. To install the lever of the fresh / circulating air on fresh air.
  1. To attach a cable to draft of the gate of the fresh / circulating air.
  2. To install the gate in the provision of fresh air.
  3. To fix a cable cover on the case by a flat bracket.

Hummock drive of the airdistributing gate

 PERFORMANCE ORDER

  1. To install the air distribution lever against the stop to the right (defrosting).
  1. Присоедининть a cable to draft of the airdistributing gate.
  2. To install the gate in the provision of defrosting.
  3. To fix a cover of a cable and a bracket on the case.

Hummock drive of adjustment of temperature

 PERFORMANCE ORDER

  1. To install the mixing lever (the lever of adjustment of temperature) completely to the left on "cold".
  2. To attach a cable to draft of the mixing gate.
  3. To install the gate in situation "cold".
  1. To fix a cable cover in a bracket on the case.

With 9/85 on 9/89 g of the issue.

Cable of the gate of the fresh / circulating air

 PERFORMANCE ORDER

Fan block

  1. To install the lever of the fresh / circulating air on fresh air.
  1. To attach a cable to draft of the gate of the fresh / circulating air.
  2. To install the gate in the provision of fresh air, for this purpose to shift the driving lever against the stop forward.
  3. To fix a cable cover on the case by a flat bracket.

Hummock drive of the airdistributing gate

 PERFORMANCE ORDER

  1. To install the lever of the airdistributing gate against the stop to the right (defrosting).
  1. To delay the lever against the stop down and to attach a cable loop on the lever.
  1. To delay a connecting bar against the stop down, then to establish a connecting bar on fastening.
  1. To clamp a bar a collar.
  2. To turn on the fan and to leave to work at the 4th step. To switch the switch button to control panels to all provisions and to check air distribution.

Hummock drive of adjustment of temperature

 PERFORMANCE ORDER

  1. To install the mixing lever (the lever of adjustment of temperature) completely to the left on "cold".
  1. To delay the lever down to an emphasis and to attach a wire loop of the mixing gate to the lever.
  1. To delay the lever of a connecting bar against the stop up and to establish a connecting bar on fastening.
  1. To clamp a bar a collar.