Mazda 323

since 1985 release

Repair and operation of the car



Mazda 323

+ Introduction
+ Petrol engines
+ Engine lubrication system
+ Engine cooling system
+ System of ignition
- Power supply system, carburetor, system of injection of fuel
   Rules of purity during the work with a power supply system
   Removal and installation/check of the sensor in the fuel tank
   Removal and installation of the fuel tank
   Removal and installation of the fuel pump
   Removal and installation/check of the fuel pump
   Removal and installation of the air filter
   - Carburetor
      Adjustment of the carburetor
      Malfunctions in a fuel supply system
      The carburetor with the falling stream and consecutive turning on of cameras
      Check and adjustment of contents WITH
      Check/removal and installation of the valve of interruption in supply of fuel
      Check/removal and installation of automatic equipment of cold start
      Removal and installation of the carburetor
   + System of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and system of steering
+ Brake system
+ Wheels and tires, body, coloring of the car, care of the car
+ System of electric equipment
+ Heater, system of lighting, devices
+ Governing bodies and methods of operation
+ Electric circuits






The carburetor with the falling stream and consecutive turning on of cameras

VZ, V5 engine

1 — draft
2 — electroheating and a bimetallic spring automatic equipment of cold start
3 — fastening
4 — draft
5 — the vacuum device with fastening
6 — the top part of the carburetor
7 — a float
8 — the needle valve of a float
9 — the vacuum piston
10 — the electromagnetic ventilating valve
11 — a nozzle of the pump and the backpressure valve
12 — bolts

13 — primary transitional jet
14 — the accelerating pump
15 — the fuel interruption in supply valve
16 — a secondary membrane
17 — the idling switch
18 — the adjusting screw of a butterfly valve
19 — a bolt
20 — the main jet
21 — a cap
22 — the screw of adjustment of composition of mix
23 — a flange
24 — an adjusting membrane of bystry idling and fastening