Mazda 323

since 1985 release

Repair and operation of the car



Mazda 323

+ Introduction
+ Petrol engines
+ Engine lubrication system
+ Engine cooling system
+ System of ignition
- Power supply system, carburetor, system of injection of fuel
   Rules of purity during the work with a power supply system
   Removal and installation/check of the sensor in the fuel tank
   Removal and installation of the fuel tank
   Removal and installation of the fuel pump
   Removal and installation/check of the fuel pump
   Removal and installation of the air filter
   - Carburetor
      Adjustment of the carburetor
      Malfunctions in a fuel supply system
      The carburetor with the falling stream and consecutive turning on of cameras
      Check and adjustment of contents WITH
      Check/removal and installation of the valve of interruption in supply of fuel
      Check/removal and installation of automatic equipment of cold start
      Removal and installation of the carburetor
   + System of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and system of steering
+ Brake system
+ Wheels and tires, body, coloring of the car, care of the car
+ System of electric equipment
+ Heater, system of lighting, devices
+ Governing bodies and methods of operation
+ Electric circuits



Смотрите http://crypto-analytics.global value of crypto currency ripple.



Check/removal and installation of the valve of interruption in supply of fuel

If the engine continue to work after switching off of ignition, it is necessary to check the fuel interruption in supply valve.

Check

 PERFORMANCE ORDER

  1. To leave the engine to idle.
  1. To switch-off the combined plug of the valve of interruption in supply of fuel and the electromagnetic ventilating valve.
  1. If the engine stops, the valve of interruption in supply of fuel is serviceable if the engine continues to work, the valve should be replaced.

Removal

 PERFORMANCE ORDER

  1. To remove the air filter.
  2. To switch-off the combined plug of the valve of interruption in supply of fuel and the electromagnetic ventilating valve.
  1. To unscrew the fuel interruption in supply valve - the shooter-.
  1. To take out the plug of the locking valve from the case of the combined plug.

Installation

 PERFORMANCE ORDER

  1. To install the valve of interruption in supply of fuel with new laying and to screw in it.
  2. To insert the plug into the case of the combined plug.
  3. To connect the combined plug.
  4. To install the air filter.