Mazda 323

since 1985 release

Repair and operation of the car



Mazda 323

+ Introduction
+ Petrol engines
+ Engine lubrication system
+ Engine cooling system
+ System of ignition
+ Power supply system, carburetor, system of injection of fuel
- Diesel engine
   Principle of operation of the diesel engine
   Removal and installation of a gear belt / adjustment of the drive of the distributive mechanism
   System of preheat of the diesel engine
   Check of system of preheat
   Removal of air from a power supply system
   Check/replacement of the electromagnetic valve of interruption in supply of fuel
   Adjustment of the drive of gas
   Check/adjustment of speed of idling
   Removal and installation of nozzles
   Removal and installation of the vacuum pump
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and system of steering
+ Brake system
+ Wheels and tires, body, coloring of the car, care of the car
+ System of electric equipment
+ Heater, system of lighting, devices
+ Governing bodies and methods of operation
+ Electric circuits






Removal and installation of the vacuum pump

The vacuum pump develops the low pressure necessary for operation of the brake amplifier.

The vacuum pump is on a reverse side of the generator. It is set in motion from a generator shaft through the conducted disk.

Removal

 PERFORMANCE ORDER

  1. To remove the vacuum pipeline, previously having weakened a collar.
  2. To unscrew the giving oil pipeline. To disconnect a returnable oil pipeline, having weakened previously a collar.
  1. To unscrew bolts of fastening of the vacuum pump and to remove the pump about consolidation of round section.

Installation

 PERFORMANCE ORDER

  1. To check consolidation of round section of the vacuum pump for existence of damages, if necessary to replace.
  2. To install the vacuum pump with consolidation and to tighten fastening bolts with effort of 7 Nanometers.
  3. To pour in an opening of the vacuum pump of a little engine oil.
  4. To put on a returnable oil pipeline and to fix by a collar.
  5. To establish and tighten the giving oil pipeline.
  6. To install the vacuum pipeline and to fix by a collar.