Mazda 323

since 1985 release

Repair and operation of the car

Mazda 323

+ Introduction
+ Petrol engines
+ Engine lubrication system
+ Engine cooling system
+ System of ignition
+ Power supply system, carburetor, system of injection of fuel
- Diesel engine
   Principle of operation of the diesel engine
   Removal and installation of a gear belt / adjustment of the drive of the distributive mechanism
   System of preheat of the diesel engine
   Check of system of preheat
   Removal of air from a power supply system
   Check/replacement of the electromagnetic valve of interruption in supply of fuel
   Adjustment of the drive of gas
   Check/adjustment of speed of idling
   Removal and installation of nozzles
   Removal and installation of the vacuum pump
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and system of steering
+ Brake system
+ Wheels and tires, body, coloring of the car, care of the car
+ System of electric equipment
+ Heater, system of lighting, devices
+ Governing bodies and methods of operation
+ Electric circuits

Adjustment of the drive of gas


  1. Before adjustment of the drive of gas it is necessary to check idling speed.
  2. The engine has to be heated-up up to the normal working temperature.

Gas cable very fragile and at installation it is necessary to treat it especially carefully. Even the insignificant bend can lead to break of a cable in use. Cables which were bent should not be established.

  1. To ask the assistant to squeeze out completely the accelerator pedal (the provision of full gas), or to record in this situation, having established wooden whetstone between a seat and a pedal.
  1. In the provision of full gas to adjust a cable on a countersupport by means of a lock-nut so that the TNVD lever adjoined without tension to the maximum emphasis.
  2. To release the accelerator pedal, the TNVD lever has to adjoin to an idling emphasis now.